Skip to main navigation Skip to search Skip to main content

Structural Evolution of Millisecond Laser-Induced Metastable Crystalline GeTe

  • Jose Recatala-Gomez
  • , Yun Li
  • , Nur Qalishah Adanan
  • , Biplab Ghosh
  • , Haiwen Dai
  • , Yang Bai
  • , Chenguang Zhang
  • , Samuel A. Morris
  • , Zavier Goh You Jin
  • , Wenhao Zhai
  • , Tobias W.W. Mass
  • , Pawan Kumar
  • , Feng Xia Wei
  • , Maung Thway
  • , Rafikul Ali Saha
  • , Eduardo Solano
  • , Martin Rosenthal
  • , Maarten Roeffaers
  • , Nigel Kirby
  • , Izabela Miłogrodzka
  • Robert E. Simpson, Kwan W. Tan*, Kedar Hippalgaonkar*
*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

Abstract

Discovering new inorganic materials using solid-state synthesis in an accelerated fashion is difficult due their sluggish diffusion coefficients and long diffusion distances. Furthermore, high temperatures used in these reactions generally produce thermodynamically stable products, which provides limited control on the reaction and prevents access to functional metastable phases. Herein, we report the use of a millisecond laser annealing technique to regulate the crystallographic phases of germanium telluride films of varying thicknesses. After laser heating, we combine temperature-dependent synchrotron grazing incidence measurements and transmission electron microscopy to study the structural evolution of the post-laser-heated GeTe. On average, we observe that millisecond laser heating induced the transformation of amorphous GeTe samples up to a ∼40% to 60% mixture of cubic β-GeTe (Fm3̅m) and rhombohedral α-GeTe (R3m) for GeTe films (thicknesses between 100 nm and 2 μm) deposited on thermally conducting substrates (such as Si), as opposed to phase-pure α-GeTe, which is obtained on low thermal conductivity substrates (quartz). Further, a room-temperature thermoelectric power factor of 6.10 μV cm-1 K-2 was measured for a laser-heated film on quartz. These findings suggest that conformal interfaces on substrates with high thermal conductivity facilitate accelerated rates of heat extraction at the sample-substrate interface to achieve phase control. We believe our strategy opens new avenues for the development of materials that are stabilized far from their equilibrium conditions.

Original languageEnglish
Pages (from-to)4977-4987
Number of pages11
JournalACS Applied Electronic Materials
Volume6
Issue number7
Early online date11 Jul 2024
DOIs
Publication statusPublished - 23 Jul 2024

Bibliographical note

Publisher Copyright:
© 2024 American Chemical Society.

Keywords

  • germanium telluride
  • high-throughput experiments
  • laser heating
  • phase control
  • thermoelectrics

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Electrochemistry

Fingerprint

Dive into the research topics of 'Structural Evolution of Millisecond Laser-Induced Metastable Crystalline GeTe'. Together they form a unique fingerprint.

Cite this