Skip to main navigation Skip to search Skip to main content

Reversible electrochemical actuation of metallic nanohoneycombs induced by pseudocapacitive redox processes

Research output: Contribution to journal › Article › peer-review

Abstract

Current metallic-based electrochemical actuators are limited to nanoporous gold/platinum with randomly distributed pores, where the charge-induced reversible strain is mainly due to the nonfaradic charging/discharging processes along the capacitive electrochemical double layer. Here, we report an electrochemical actuating property of nanohoneycomb-structured nickel, with the actuation mechanism mainly due to a pseudocapacitive behavior by means of reversible faradic redox reactions. By using a duallate synthesis method, a bilayered cantilever, comprising a nanohoneycomb layer backed by a solid layer of the same metal, was fabricated. Reversible bending of the cantilever upon cyclic potential triggering was observed. The strain of the cantilever increases nonlinearly with both potential and charge due to redox reactions. The maximum strain that can be achieved under a certain scan rate complies with a linear relationship with the capacity. Benefiting from the stable Ni(II)/Ni(III) redox couples at the electrode surface, the reversible actuation is very stable in hydroxide solutions.

Original languageEnglish
Pages (from-to)3984-3995
Number of pages12
JournalACS Nano
Volume9
Issue number4
DOIs
Publication statusPublished - 28 Apr 2015

Bibliographical note

Publisher Copyright:
© 2015 American Chemical Society.

Keywords

  • electrochemical actuation
  • electrochemical double layer
  • nanohoneycomb nickel
  • reversible redox reactions
  • surface-charge-induced strain

ASJC Scopus subject areas

  • General Materials Science
  • General Engineering
  • General Physics and Astronomy

Fingerprint

Dive into the research topics of 'Reversible electrochemical actuation of metallic nanohoneycombs induced by pseudocapacitive redox processes'. Together they form a unique fingerprint.

Cite this