Skip to main navigation Skip to search Skip to main content

Laser powder bed fusion of improved yield strength and dense TiC/Cu composite

  • Zhizhou Zhang
  • , Tianxiao Si
  • , Yue Kong
  • , Chunjiang Fu
  • , Hasan Huseyin Hayat
  • , Biao Cai*
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

31 Downloads (Pure)

Abstract

Laser powder bed fusion (LPBF) of copper is limited by low infrared absorption and porosity. This study used 0.5 wt% TiC nanoparticles to coat Cu powders via acoustic mixing, which provides a dual function: enhancing near-infrared optical absorption during melting and reinforcing the Cu matrix after solidification. The composite powder showed a reflectance at 1070 nm dropping to 13.8% from 76.7% for pure copper without the coating. Optimal LPBF processing conditions delivered relative density of 99.4%. Microscopy and diffraction show that TiC remains as discrete nanoparticles without detectable secondary phases, supporting a dispersion-strengthening mechanism while preserving matrix continuity. Electron backscatter diffraction and microscopy revealed fine grains in the as-built state and coarsening after annealing at 1000 °C for 9 h. The as-built specimen reached a yield strength of 120.2 ± 2.6 MPa, an ultimate tensile strength of 202.1 ± 6.51 MPa and 32.96 ± 6.83% total elongation and the heat-treated specimen exhibited a yield strength of 78.6 ± 9.7 MPa, an ultimate tensile strength of 188.5 ± 12.56 MPa and 37 ± 4.27% elongation. Electrical conductivity reached 50.3 ± 0.3% IACS in the as-built state and 71.87 ± 0.49% IACS after heat treatment. These findings defined a practical route in which trace TiC nanoparticles enabled infrared laser powder bed fusion of copper at reduced power with near full density and balanced strength, ductility and electrical conductivity.
Original languageEnglish
Pages (from-to)768-783
Number of pages16
JournalJournal of Manufacturing Processes
Volume176
Early online date22 Sept 2026
DOIs
Publication statusPublished - 30 Oct 2026

Fingerprint

Dive into the research topics of 'Laser powder bed fusion of improved yield strength and dense TiC/Cu composite'. Together they form a unique fingerprint.

Cite this