Integrated filter–amplifiers: a comprehensive review

Yang Gao; Xiaobang Shang; Lei Li; Cheng Guo; Yi Wang

doi:10.1109/MMM.2022.3155034

Integrated filter–amplifiers: a comprehensive review

Yang Gao, Xiaobang Shang, Lei Li, Cheng Guo, Yi Wang

Research output: Contribution to journal › Article › peer-review

177 Downloads (Pure)

Abstract

Amplifiers and filters are essential components in microwave systems. An amplifier is used to increase the signal strength, and it is usually cascaded by filters for frequency selection or harmonic rejection [1] – [3] . Their functionalities require a precise design of the individual parts as well as the way in which they are connected. The common approach is to make individual components with a system impedance that is usually 50Ω. A generic example of the filters and amplifier in a generalized receiver is shown in Figure 1(a) .

Original language	English
Pages (from-to)	57-75
Number of pages	19
Journal	IEEE Microwave Magazine
Volume	23
Issue number	6
Early online date	5 May 2022
DOIs	https://doi.org/10.1109/MMM.2022.3155034
Publication status	Published - Jun 2022

Keywords

Amplifiers
Matched filters
Microstrip filters
Microwave amplifiers
Microwave theory and techniques
Microwave transistors
Receivers
Transistors

Access to Document

10.1109/MMM.2022.3155034Licence: Other (please provide link to licence statement

GaoY2022Integrated
Y. Gao, X. Shang, L. Li, C. Guo and Y. Wang, "Integrated Filter–Amplifiers: A Comprehensive Review," in IEEE Microwave Magazine, vol. 23, no. 6, pp. 57-75, June 2022, doi: 10.1109/MMM.2022.3155034. © 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 1.97 MBLicence: Other (please specify with Rights Statement)

Cite this

@article{c5b1d19509e44cfdbb2183496a726152,

title = "Integrated filter–amplifiers: a comprehensive review",

abstract = "Amplifiers and filters are essential components in microwave systems. An amplifier is used to increase the signal strength, and it is usually cascaded by filters for frequency selection or harmonic rejection [1] – [3] . Their functionalities require a precise design of the individual parts as well as the way in which they are connected. The common approach is to make individual components with a system impedance that is usually 50Ω. A generic example of the filters and amplifier in a generalized receiver is shown in Figure 1(a) .",

keywords = "Amplifiers, Matched filters, Microstrip filters, Microwave amplifiers, Microwave theory and techniques, Microwave transistors, Receivers, Transistors",

author = "Yang Gao and Xiaobang Shang and Lei Li and Cheng Guo and Yi Wang",

year = "2022",

month = jun,

doi = "10.1109/MMM.2022.3155034",

language = "English",

volume = "23",

pages = "57--75",

journal = "IEEE Microwave Magazine",

issn = "1527-3342",

publisher = "Institute of Electrical and Electronics Engineers (IEEE)",

number = "6",

}

TY - JOUR

T1 - Integrated filter–amplifiers

T2 - a comprehensive review

AU - Gao, Yang

AU - Shang, Xiaobang

AU - Li, Lei

AU - Guo, Cheng

AU - Wang, Yi

PY - 2022/6

Y1 - 2022/6

N2 - Amplifiers and filters are essential components in microwave systems. An amplifier is used to increase the signal strength, and it is usually cascaded by filters for frequency selection or harmonic rejection [1] – [3] . Their functionalities require a precise design of the individual parts as well as the way in which they are connected. The common approach is to make individual components with a system impedance that is usually 50Ω. A generic example of the filters and amplifier in a generalized receiver is shown in Figure 1(a) .

AB - Amplifiers and filters are essential components in microwave systems. An amplifier is used to increase the signal strength, and it is usually cascaded by filters for frequency selection or harmonic rejection [1] – [3] . Their functionalities require a precise design of the individual parts as well as the way in which they are connected. The common approach is to make individual components with a system impedance that is usually 50Ω. A generic example of the filters and amplifier in a generalized receiver is shown in Figure 1(a) .

KW - Amplifiers

KW - Matched filters

KW - Microstrip filters

KW - Microwave amplifiers

KW - Microwave theory and techniques

KW - Microwave transistors

KW - Receivers

KW - Transistors

UR - http://www.scopus.com/inward/record.url?scp=85130636973&partnerID=8YFLogxK

U2 - 10.1109/MMM.2022.3155034

DO - 10.1109/MMM.2022.3155034

M3 - Article

SN - 1527-3342

VL - 23

SP - 57

EP - 75

JO - IEEE Microwave Magazine

JF - IEEE Microwave Magazine

IS - 6

ER -

Integrated filter–amplifiers: a comprehensive review

Abstract

Keywords

Access to Document

Fingerprint

Cite this