Influence of bifilm defects generated during mould filling on the tensile properties of Al–Si–Mg cast alloys

Keyphrases

• Al-Mg-Si 100%
• Alloy Casting 33%
• Aluminum Melt 33%
• Bifilm Defect 100%
• Cast Alloy 100%
• Cast Aluminum Alloy 33%
• Casting Parameters 33%
• Casting Properties 66%
• Design of Experiments Approach 33%
• Double Oxide Film Defects 33%
• Entrainment 33%
• Filling Condition 33%
• Filtration 33%
• Full-scale Experiment 33%
• Gating System 33%
• Hydrogen Content 66%
• Hydrogen Level 33%
• Hydrogen Porosity 33%
• Mechanical Properties 33%
• Mg Alloy 33%
• Modulus Parameter 33%
• Mold Filling 100%
• Oxide Film 33%
• Position Parameter 33%
• Response Variable 33%
• Tensile Elongation 33%
• Tensile Properties 100%
• Tensile Strength 66%
• Weibull Modulus 66%

Engineering

• Cast Alloy 100%
• Casting Alloy 33%
• Casting Parameter 33%
• Design of Experiments 33%
• Full Factorial Design 33%
• Hydrogen Level 33%
• Mold Filling 100%
• Oxide Film 66%
• Porosity 33%
• Process Parameter 33%
• Tensile Property 100%
• Ultimate Tensile Strength 66%
• Weibull Modulus 66%

Material Science

• Aluminum 50%
• Aluminum Alloy 50%
• Cast Alloy 100%
• Experimental Design 50%
• Factorial Design 50%
• Magnesium Alloys 50%
• Oxide Film 100%
• Tensile Property 100%
• Ultimate Tensile Strength 100%