TY - JOUR
T1 - Fabrication and characterization of stabilised zirconia micro parts via slip casting and soft moulding
AU - Hassanin, H.
AU - Jiang, K.
PY - 2013/9/1
Y1 - 2013/9/1
N2 - Slip casting is introduced to fabricate yttria stabilised zirconia micro parts. The key soft moulding with the aid of porous substrate has been adjusted to filtrate the slips. Further study examined the effect of particle size on the properties of the slips and sintered micro parts has been investigated. High quality micro parts with a density of 98.5%, shrinkage of 20.9%, hardness of 14.65 GPa, flexural strength of 509 MPa, and roughness of 54.38 nm have been successfully obtained.
AB - Slip casting is introduced to fabricate yttria stabilised zirconia micro parts. The key soft moulding with the aid of porous substrate has been adjusted to filtrate the slips. Further study examined the effect of particle size on the properties of the slips and sintered micro parts has been investigated. High quality micro parts with a density of 98.5%, shrinkage of 20.9%, hardness of 14.65 GPa, flexural strength of 509 MPa, and roughness of 54.38 nm have been successfully obtained.
UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-84880252351&partnerID=8YFLogxK
U2 - 10.1016/j.scriptamat.2013.05.004
DO - 10.1016/j.scriptamat.2013.05.004
M3 - Article
AN - SCOPUS:84880252351
SN - 1359-6462
VL - 69
SP - 433
EP - 436
JO - Scripta Materialia
JF - Scripta Materialia
IS - 6
ER -