Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

V. Manoylo; Arhun Shch; V. Migal; H. Hnatova; V. Korohodskyi; E. Zenkin; I. Shevchenko

doi:10.30880/ijie.2023.15.04.013

Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

V. Manoylo, Arhun Shch, V. Migal^*, H. Hnatova, V. Korohodskyi, E. Zenkin, I. Shevchenko

^*Corresponding author for this work

Civil Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels has caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas.

Original language	English
Pages (from-to)	146-156
Number of pages	11
Journal	International Journal of Integrated Engineering
Volume	15
Issue number	4
DOIs	https://doi.org/10.30880/ijie.2023.15.04.013
Publication status	Published - 28 Aug 2023

Bibliographical note

Publisher Copyright:
© Universiti Tun Hussein Onn Malaysia Publisher’s Office

Keywords

car conversion
electromagnetic gas dispenser
energy efficiency
Gas engine
operating modes

ASJC Scopus subject areas

Civil and Structural Engineering
Materials Science (miscellaneous)
Mechanics of Materials
Mechanical Engineering
Industrial and Manufacturing Engineering
Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.30880/ijie.2023.15.04.013Licence: Creative Commons: Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)

Cite this

@article{c04251c5d61a42ce829a239b10355cf4,

title = "Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas",

abstract = "The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels has caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas.",

keywords = "car conversion, electromagnetic gas dispenser, energy efficiency, Gas engine, operating modes",

author = "V. Manoylo and Arhun Shch and V. Migal and H. Hnatova and V. Korohodskyi and E. Zenkin and I. Shevchenko",

note = "Publisher Copyright: {\textcopyright} Universiti Tun Hussein Onn Malaysia Publisher{\textquoteright}s Office",

year = "2023",

month = aug,

day = "28",

doi = "10.30880/ijie.2023.15.04.013",

language = "English",

volume = "15",

pages = "146--156",

journal = "International Journal of Integrated Engineering",

issn = "2229-838X",

number = "4",

}

TY - JOUR

T1 - Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

AU - Manoylo, V.

AU - Shch, Arhun

AU - Migal, V.

AU - Hnatova, H.

AU - Korohodskyi, V.

AU - Zenkin, E.

AU - Shevchenko, I.

N1 - Publisher Copyright: © Universiti Tun Hussein Onn Malaysia Publisher’s Office

PY - 2023/8/28

Y1 - 2023/8/28

N2 - The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels has caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas.

AB - The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels has caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas.

KW - car conversion

KW - electromagnetic gas dispenser

KW - energy efficiency

KW - Gas engine

KW - operating modes

UR - http://www.scopus.com/inward/record.url?scp=85175045350&partnerID=8YFLogxK

U2 - 10.30880/ijie.2023.15.04.013

DO - 10.30880/ijie.2023.15.04.013

M3 - Article

AN - SCOPUS:85175045350

SN - 2229-838X

VL - 15

SP - 146

EP - 156

JO - International Journal of Integrated Engineering

JF - International Journal of Integrated Engineering

IS - 4

ER -

Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

Abstract

Bibliographical note

Keywords

ASJC Scopus subject areas

UN SDGs

Access to Document

Fingerprint

Cite this