Effect of Milling Conditions on the Purity of Hydrogen Desorbed from Ball-Milled Graphite

Yinghe Zhang, David Book

Research output: Contribution to journalArticle

12 Citations (Scopus)


During ball milling, graphite can absorb a relatively large amount of hydrogen (7.4 wt %). However, during subsequent heating, hydrogen is usually desorbed together with a small amount of methane. Therefore, there is a need to understand the mechanism of hydrogen sorption. In this work, graphite samples were ball milled in a tungsten carbide pot under 3 bar hydrogen and then characterized by TGA-mass spectrometry, TEM, and Raman spectroscopy. It was found that the optimum milling time was 10 h, resulting in desorption of 5.5 wt % pure hydrogen (using a mass spectrometer) during heating under argon to 990 degrees C. In samples milled for longer than 10 h the amount of desorbed hydrogen decreased with methane being released in increasing amounts, while the amount of pure desorbed hydrogen was reduced for milling durations less than 10 h. The importance of milling time is discussed in terms of the different reaction steps between carbon and hydrogen atoms, leading to formation of methyl radicals, followed by evolution of methane.
Original languageEnglish
Pages (from-to)25285-25289
Number of pages5
JournalJournal of Physical Chemistry C
Issue number51
Publication statusPublished - 1 Dec 2011


Dive into the research topics of 'Effect of Milling Conditions on the Purity of Hydrogen Desorbed from Ball-Milled Graphite'. Together they form a unique fingerprint.

Cite this