Skip to main navigation Skip to search Skip to main content

Development of ammonia-biodiesel fueled agricultural tractor: Aspects of retrofitting a compression ignition engine to direct ammonia injection

  • Michał Pasternak
  • , Grzegorz Przybyła*
  • , Reddy Siddareddy
  • , Michał Lewandowski
  • , Karl Bjørgen
  • , Fabian Mauss
  • , Ebrahim Nadimi
  • , Grzegorz Peczkis
  • , Min min Zhou
  • , Wojciech Adamczyk
  • *Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

Abstract

The automotive industry has shown growing interest in ammonia as a carbon-free fuel, which holds potential for mitigating the greenhouse effect. Nonetheless, adapting current combustion engines to use ammonia necessitates prior modifications. This paper introduces a retrofitting technique for converting an existing compression ignition engine into one powered by a direct injection of ammonia and biodiesel. The development results from collaboration between Polish and Norwegian research teams as part of the ACTIVATE project (Ammonia as carbon-free fuel for internal combustion engine-driven agricultural vehicles). The new technology is grounded on experimental and numerical research involving a single-cylinder engine installed in a small agricultural tractor. Biodiesel was directly injected to initiate ammonia combustion. Experimental activities were performed on engine test benches and a chassis dynamometer, complemented by 0D and 3D simulations using the stochastic reactor model and CFD code Converge, respectively. A comprehensive exploration of engine operating conditions and fuel injection strategies was undertaken experimentally and numerically to assess the potential benefits and drawbacks of various designs. A segment of the research focused on analyzing nitrous oxide formation, given its significant impact on global warming. The investigations resulted in a method for combusting ammonia with biodiesel as an ignition enhancer. It was determined that maintaining a stable engine operation in a tractor under real driving scenarios requires 47% of the energy sourced from ammonia. Optimal engine performance occurs when ammonia and biodiesel are injected near the end of the compression stroke, closely followed by the ignition promoter. A prolonged interval between these injections impairs combustion efficiency and raises ammonia emissions. The integrated numerical and experimental research resulted in a demonstration tractor fueled by directly injected biodiesel and ammonia.

Original languageEnglish
Article number136255
Number of pages14
JournalEnergy
Volume327
Early online date3 May 2025
DOIs
Publication statusPublished - 1 Jul 2025

Bibliographical note

Publisher Copyright:
© 2025

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • 0D and 3D simulations
  • Ammonia direct injection
  • Compression ignition engine
  • Emissions
  • Low-carbon fuels

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Modelling and Simulation
  • Renewable Energy, Sustainability and the Environment
  • Building and Construction
  • Fuel Technology
  • Energy Engineering and Power Technology
  • Pollution
  • Mechanical Engineering
  • General Energy
  • Management, Monitoring, Policy and Law
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Development of ammonia-biodiesel fueled agricultural tractor: Aspects of retrofitting a compression ignition engine to direct ammonia injection'. Together they form a unique fingerprint.

Cite this