Cure width potential for MOD resin composite molar restorations

William Palin, DP Senyilmaz, Peter Marquis, Adrian Shortall

Research output: Contribution to journalArticle

40 Citations (Scopus)

Abstract

OBJECTIVES: To investigate the capability of modern light-curing units exhibiting differences in emission spectra and light source exit window dimensions, for "one-shot" full-width curing of extensive (molar MOD) resin composite restorations. METHOD: Specimens of Tetric (TT), Tetric Ceram HB (TC), Tetric Evoceram (TE) and Tetric Ceram Bleach (TB) resin composites containing varying ratios of Lucirin (TPO) and/or camphorquinone (CQ) photoinitiators were packed into a bar-shaped mould (12 mm length x 2 mm width x 2 mm thickness). Each product was irradiated using a halogen (Optilux 401; QTH), a conventional LED (LEDemetron; LED) and two so-called "third generation" oval-footprint LED light-curing units (LCUs) of the same model. The latter featured bimodal emission spectra (blue and ultraviolet diodes) with either high (unmodified output) and approximately 50% (modified output) blue light intensity (UltraLume-5; ULs, ULm, respectively). Vickers hardness number was obtained across the lateral extent of the bar at 1mm increments from the centre point on both upper and lower surfaces of the specimens. RESULTS: Significant linear relationships (R(2)=0.71-0.98) for each distance from the central position of all LCUs were identified between measured light intensity and corresponding upper and lower surface hardness values for each product (P0.05) were recorded in total upper surface hardness of TC or TE cured with LED (68.7+/-3.2 and 70.5+/-2.5) or ULm (56.8+/-2.0 and 57.7+/-2.0). However, upper surface hardness of TT (CQ only) cured with ULm was significantly decreased (P0.05) was identified for TB (containing TPO and decreased CQ) cured with either ULs or ULm (P>0.05) and was significantly increased (P
Original languageEnglish
Pages (from-to)1083-94
Number of pages12
JournalDental Materials
Volume24
Issue number8
DOIs
Publication statusPublished - 1 Aug 2008

Keywords

  • width of cure
  • light dispersion
  • photoinitiator
  • resin composite
  • emission spectra

Fingerprint

Dive into the research topics of 'Cure width potential for MOD resin composite molar restorations'. Together they form a unique fingerprint.

Cite this