Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project

Gerhard Gerhard, Laszlo Sturz, H Nguyen-Thi, N Mangelinck-Noel, Y. Z. Li, Charles-Andre Gandin, R Fleurisson, G Guillemot, Shawn McFadden, R. P. Mooney, Peter Voorhees, Andras Roosz, A Ronaföldi, Christoph Beckermann, Alain Karma, C.-H. Chen, Nils Warnken, A Saad, G.-U. Grün, Manfred GrohnI Poitrault, T Pehl, I Nagy, D Todt, Olivier Minster, W Sillekens

Research output: Contribution to journalArticlepeer-review

12 Citations (Scopus)
317 Downloads (Pure)


During casting, often a dendritic microstructure is formed, resulting in a columnar or an equiaxed grain structure, or leading to a transition from columnar to equiaxed growth (CET). The detailed knowledge of the critical parameters for the CET is important because the microstructure affects materials properties. To provide unique data for testing of fundamental theories of grain and microstructure formation, solidification experiments in microgravity environment were performed within the European Space Agency Microgravity Application Promotion (ESA MAP) project Columnar-to-Equiaxed Transition in SOLidification Processing (CETSOL). Reduced gravity allows for purely diffusive solidification conditions, i.e., suppressing melt flow and sedimentation and floatation effects. On-board the International Space Station, Al-7 wt.% Si alloys with and without grain refiners were solidified in different temperature gradients and with different cooling conditions. Detailed analysis of the microstructure and the grain structure showed purely columnar growth for nonrefined alloys. The CET was detected only for refined alloys, either as a sharp CET in the case of a sudden increase in the solidification velocity or as a progressive CET in the case of a continuous decrease of the temperature gradient. The present experimental data were used for numerical modeling of the CET with three different approaches: (1) a front tracking model using an equiaxed growth model, (2) a three-dimensional (3D) cellular automaton–finite element model, and (3) a 3D dendrite needle network method. Each model allows for predicting the columnar dendrite tip undercooling and the growth rate with respect to time. Furthermore, the positions of CET and the spatial extent of the CET, being sharp or progressive, are in reasonably good quantitative agreement with experimental measurements.
Original languageEnglish
Pages (from-to)1269–1279
Issue number8
Early online date1 Jun 2017
Publication statusPublished - Aug 2017


Dive into the research topics of 'Columnar and Equiaxed Solidification of Al-7 wt.% Si Alloys in Reduced Gravity in the Framework of the CETSOL Project'. Together they form a unique fingerprint.

Cite this