CO2 capture using highly viscous amine blends in nonporous membrane contactors

Luca Ansaloni, Ardi Hartono, Muhammad Awais, Hanna Knuutila, Liyuan Deng

Research output: Contribution to journalArticlepeer-review

13 Citations (Scopus)
246 Downloads (Pure)

Abstract

New amine blends have shown a promising potential to reduce the energy penalty for CO2 capture in post combustion, making the deployment of carbon capture technologies one-step closer. However, their application at the industrial scale is threaten by their high volatility. Non-porous membrane contactors offer a viable solution to properly control amine emissions from these absorbents. In the present work, the CO2 capture performance of non-porous membrane contactors using new amine blends as liquid phase was investigated in a temperature range typical for the absorption step (25–60 °C). Different amine blends with promising features in terms of cycling capacity and regeneration energy requirement were selected as liquid absorbents. Thin composite membranes fabricated by coating a perfluoropolymer on the top of a porous polypropylene layer were used as the interface between the gas and the liquid. At room temperature, membrane contactors using new absorbents exhibit a lower CO2 mass transfer coefficient compared to the benchmark (30 wt% MEA), possibly due to the high viscosity of these liquids. The modelling analysis suggests that the liquid boundary layer dominates the mass transfer resistance in the temperature range up to 40 °C, but at higher temperatures, the decrease of the solvent viscosity makes the mass transfer dominated by the membrane phase. Interestingly, the new amine blends show better performance compared to the benchmark at higher CO2 concentrations in feed gas, highlighting a good potential to capture CO2 from concentrated flue gas from steel/cement industry or to upgrade biogas.
Original languageEnglish
Pages (from-to)1581-1591
Number of pages11
JournalChemical Engineering Journal
Volume359
Early online date3 Nov 2018
DOIs
Publication statusPublished - 1 Mar 2019

Keywords

  • Absorbent viscosity
  • Amine blends
  • CO capture
  • Liquid boundary layer
  • Non-porous membrane contactor

ASJC Scopus subject areas

  • General Chemistry
  • Environmental Chemistry
  • General Chemical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint

Dive into the research topics of 'CO2 capture using highly viscous amine blends in nonporous membrane contactors'. Together they form a unique fingerprint.

Cite this