Behaviour and design of high-strength steel cross-sections under combined loading

Michaela Gkantou*, Marios Theofanous, Jie Wang, Charalampos Baniotopoulos, Leroy Gardner

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

11 Citations (Scopus)
239 Downloads (Pure)


The behaviour of hot-rolled high-strength steel (HSS) tubular sections under combined compression and uniaxial bending was investigated both experimentally and numerically. The experimental programme encompassed a series of material coupon tests, initial geometric imperfection measurements, residual stress measurements and 12 tests on stub columns subjected to uniaxial eccentric compression. Numerical models were developed and validated against the experimental results. An extensive parametric study was then performed with the aim of generating further structural performance data over a wider range of cross-section slendernesses, aspect ratios and applied eccentricities. The results were utilised for an assessment of the applicability of relevant Eurocode provisions to HSS cross-sections under combined loading. Conclusions regarding the applicability of Eurocode interaction curves to S460 and S690 square and rectangular hollow sections are presented.

Original languageEnglish
Article number1600114
Pages (from-to)841-854
Number of pages14
JournalInstitution of Civil Engineers. Proceedings. Structures and Buildings
Issue number11
Early online date15 Aug 2017
Publication statusPublished - 1 Nov 2017

Bibliographical note

Article No. SB-D-16-00114R2


  • Codes of practice & standards
  • Design methods & aids
  • Steel structures

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction


Dive into the research topics of 'Behaviour and design of high-strength steel cross-sections under combined loading'. Together they form a unique fingerprint.

Cite this