Platform Grant for the University of Birmingham Positron Imaging Centre

Research output

Research output per year 2010 2010 2011 2012 2015

• 30 Article
• 1 Paper
• 1 Conference article

Research output per year

Research output per year

Search results

• 2015

  A comparison of magnetic resonance, X-ray and positron emission particle tracking measurements of a single jet of gas entering a bed of particles

  Pore, M., Ong, G. H., Boyce, C. M., Materazzi, M., Gargiuli, J., Leadbeater, T., Sederman, A. J., Dennis, J. S., Holland, D. J., Ingram, A., Lettieri, P. & Parker, D., 7 Jan 2015, In: Chemical Engineering Science. 122, p. 210-218 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Particle Tracking 100%
  • Magnetic Resonance 92%
  • Positrons 90%
  • Positron 68%
  • Jet 62%
  13 Citations (Scopus)

• Investigation of particle velocity in FCC gas-fluidized beds based on different measurement techniques

  Tebianian, S., Dubrawski, K., Ellis, N., Cocco, R. A., Hays, R., Reddy Karri, S. B., Leadbeater, T. W., Parker, D., Chaouki, J., Jafari, R., Garcia-trinanes, P., Seville, J. P. K. & Grace, J. R., 4 May 2015, In: Chemical Engineering Science. 127, p. 310-322

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • beds 100%
  • gases 53%
  • hydrodynamics 39%
  • particle emission 33%
  • charge flow devices 29%
  31 Citations (Scopus)

  496 Downloads (Pure)

• The use of positron emission particle tracking (PEPT) to study milling of roll-compacted microcystalline cellulose ribbons

  Yu, S., Wu, C., Adams, M. J., Reynolds, G., Gururajan, B., Gargiuli, J., Leadbeater, T., Roberts, R. & Parker, D., 1 Nov 2015, In: Powder Technology. 285, p. 74-79

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • particle emission 100%
  • cellulose 88%
  • ribbons 75%
  • positrons 70%
  • blades 21%
  4 Citations (Scopus)

  224 Downloads (Pure)

• Validation of hydrodynamic and microbial inactivation models for UV-C treatment of milk in a swirl-tube ‘SurePure Turbulator™’

  Alberini, F., Simmons, M. J. H., Parker, D. & Koutchma, T., 1 Oct 2015, In: Journal of Food Engineering. 162, p. 63-69 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • milk 100%
  • hydrodynamics 70%
  • fluid 26%
  • pathogenic organism 23%
  • pathogen 14%
  12 Citations (Scopus)

  368 Downloads (Pure)
• 2014

  Influence of initial conditions on granular dynamics near the jamming transition

  Windows-Yule, C. R. K., Rosato, A. D., Rivas, N. & Parker, D., 10 Jun 2014, In: New Journal of Physics. 16, 063016.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • jamming 100%
  • packing density 47%
  • bursts 35%
  • histories 32%
  • vibration 25%
  9 Citations (Scopus)

  217 Downloads (Pure)

• Study on solids translational and rotational motions in rotating cans

  Yang, Z., Fan, H., Parker, D., Fryer, P., Bakalis, S. & Fan, X., 1 Jun 2014, In: LWT - Food Science and Technology. 57, 1, p. 383-392

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • cans 100%
  • Solanum tuberosum 54%
  • potatoes 37%
  • particulate emissions 25%
  • canned foods 24%
  7 Citations (Scopus)

  188 Downloads (Pure)
• 2013

  Boltzmann statistics in a three-dimensional vibrofluidized granular bed: Idealizing the experimental system

  Windows-Yule, C. R. K. & Parker, D. J., 27 Feb 2013, In: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics). 87, 2

  Research output: Contribution to journal › Article › peer-review

  • statistics 100%
  • white noise 89%
  • chaotic dynamics 80%
  • energy 69%
  • particle 35%
  17 Citations (Scopus)

• Development of positron emission particle tracking for studying laminar mixing in Kenics static mixer

  Rafiee, M., Simmons, M. J. H., Ingram, A. & Stitt, E. H., 1 Nov 2013, In: Chemical Engineering Research and Design. 91, 11, p. 2106-2113

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Thermal Convection and Temperature Inhomogeneity in a Vibrofluidized Granular Bed: The Influence of Sidewall Dissipation

  Windows-yule, C. R. K., Rivas, N. & Parker, D., 2013, In: Physical Review Letters. 111, 3, 038001.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)
• 2012

  A new line density tracking algorithm for PEPT and its application to multiple tracers

  Bickell, M., Buffler, A., Govender, I. & Parker, D. J., 1 Aug 2012, In: Nuclear Instruments & Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors. 682, p. 36-41 6 p.

  Research output: Contribution to journal › Article › peer-review

  • tracer 100%
  • spatial resolution 48%
  • particle 31%
  • experiment 24%
  • analysis 16%
  27 Citations (Scopus)

• Development of a hydrodynamic model for the UV-C inactivation of milk in a novel 'SurePure turbulator TM, swirl-tube reactor

  Simmons, M., Alberini, F., Tsoligkas, AN., Gargiuli, J., Parker, D., Fryer, P. & Robinson, S., 1 Jan 2012, In: Innovative Food Science & Emerging Technologies. 14, p. 122-134

  Research output: Contribution to journal › Article
  15 Citations (Scopus)

• Experimental determination of temperature profiles in a sheared granular bed containing two and three sizes of particles

  Wildman, R. D., Huntley, J. M., Hrenya, C. M., Leadbeater, T. & Parker, D. J., 1 Apr 2012, In: Granular Matter. 14, 2, p. 215-220 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Positrons 100%
  • Positron 76%
  • Shearing 69%
  • temperature profiles 63%
  • beds 61%
  4 Citations (Scopus)

• Experimental study on the influence of bed material on the scaling of solids circulation patterns in 3D bubbling gas-solid fluidized beds of glass and polyethylene using positron emission particle tracking

  Laverman, J. A., Annaland, M. V. S., Kuipers, J. A. M., Fan, X., Parker, D. J., Ingram, A. & Seville, J. P. K., 1 Jul 2012, In: Powder Technology. 224, p. 297-305 9 p.

  Research output: Contribution to journal › Article › peer-review

  • particle emission 100%
  • beds 74%
  • polyethylenes 70%
  • positrons 70%
  • scaling 54%
  57 Citations (Scopus)

• Numerical and experimental study on spout elevation in spout-fluidized beds

  Van Buijtenen, M. S., Buist, K., Deen, N. G., Kuipers, J. A. M., Leadbeater, T. & Parker, D., 1 Aug 2012, In: AIChE Journal. 58, 8, p. 2524-2535

  Research output: Contribution to journal › Article › peer-review
  31 Citations (Scopus)

• Positron imaging systems for studying particulate, granular and multiphase flows

  Leadbeater, T. W., Parker, D. J. & Gargiuli, J., 1 Apr 2012, In: Particuology. 10, 2, p. 146-153 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Positrons 100%
  • Positron emission tomography 90%
  • multiphase flow 79%
  • Positron 76%
  • Multiphase flow 75%
  34 Citations (Scopus)

• Twin screw wet granulation: The study of a continuous twin screw granulator using Positron Emission Particle Tracking (PEPT) technique.

  Lee, K., Ingram, A. & Rowson, N., 26 Apr 2012, In: European Journal of Pharmaceutics and Biopharmaceutics. 81, 3, p. 666-673 8 p.

  Research output: Contribution to journal › Article

  • Electrons 100%
  • Powders 63%
  46 Citations (Scopus)
• 2011

  A modular positron camera for the study of industrial processes

  Leadbeater, T. & Parker, D., 1 Oct 2011, In: Nuclear Instruments & Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors. 652, 1, p. 646-649 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Positrons 100%
  • Cameras 45%
  • PERT 39%
  • Photons 30%
  • Geometry 15%
  10 Citations (Scopus)

• A new approach to high-shear mixer granulation using positron emission particle tracking

  Saito, Y., Fan, X., Ingram, A. & Seville, JPK., 1 Feb 2011, In: Chemical Engineering Science. 66, 4, p. 563-569 7 p.

  Research output: Contribution to journal › Article

  • particle emission 100%
  • positrons 70%
  • shear 53%
  • products 33%
  • particle motion 29%
  15 Citations (Scopus)

• Characterization of the latest Birmingham modular positron camera

  Leadbeater, T., Parker, D. & Gargiuli, J., 1 Oct 2011, In: Measurement Science and Technology. 22, 10, p. 104017 1 p.

  Research output: Contribution to journal › Article

  • Positrons 100%
  • Particle Tracking 83%
  • Camera 82%
  • positrons 57%
  • Field of View 53%
  5 Citations (Scopus)

• Flow visualisation in co-rotating twin screw extruders: Positron emission particle tracking and numerical particle trajectories

  Diemer, J., Chilles, C., Colbert, J., Miri, T., Ingram, A., David, P., Sarhangi Fard, A. & Anderson, P. D., 1 Nov 2011, In: International Polymer Processing. 26, 5, p. 540-550 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Positrons 100%
  • Positron 76%
  • Extruders 75%
  • Flow visualization 72%
  • Residence Time 67%
  7 Citations (Scopus)

• Impact of solid sizes on flow structure and particle motions in bubbling fluidization

  Fan, X., Yang, Z. & Parker, D., 1 Jan 2011, In: Powder Technology. 206, 1-2, p. 132-138 7 p.

  Research output: Contribution to journal › Article

  • particle motion 100%
  • fluidization 91%
  • flow structure 85%
  • particle size 25%
  • travel 19%
  14 Citations (Scopus)

• Modelling the transport disengagement height in fluidized beds

  Brems, A., Chan, CW., Seville, JPK., Parker, D. & Baeyens, J., 1 Mar 2011, In: Advanced Powder Technology. 22, 2, p. 155-161 7 p.

  Research output: Contribution to journal › Article

  • Bubbling 100%
  • Fluidized Bed 98%
  • Positron 94%
  • Bubble 85%
  • Fluidized beds 82%
  9 Citations (Scopus)

• Numerical and experimental study on multiple-spout fluidized beds

  van Buijtenen, MS., van Dijk, WJ., Deen, NG., Kuipers, JAM., Leadbeater, T. & Parker, D., 1 Jun 2011, In: Chemical Engineering Science. 66, 11, p. 2368-2376 9 p.

  Research output: Contribution to journal › Article

  • beds 100%
  • particle emission 26%
  • particle image velocimetry 22%
  • positrons 18%
  • nonintrusive measurement 16%
  83 Citations (Scopus)

• The Application of Positron Emission Particle Tracking (PEPT) to Study Inclusions in the Casting Process

  Burnard, D., Gargiuli, J., Leadbeater, T., Parker, D. & Griffiths, W., 1 Jan 2011, p. 25-28. 4 p.

  Research output: Contribution to conference (unpublished) › Paper
  3 Citations (Scopus)

• The Use of Positron Emission Particle Tracking (PEPT) to Study the Movement of Inclusions in Low-Melting-Point Alloy Castings

  Griffiths, W., Beshay, Y., Caden, AJ., Fan, X., Gargiuli, J., Leadbeater, T. & Parker, D., 9 Nov 2011, In: Metallurgical and Materials Transactions B.

  Research output: Contribution to journal › Article › peer-review

  • Positrons 100%
  • particle emission 82%
  • Positron 76%
  • Melting point 68%
  • melting points 61%
  8 Citations (Scopus)

• Three-Dimensional Visualization of Powder Motion in a High Shear Mixer

  Saito, Y., Ingram, A., Fan, X. & Seville, JPK., 1 Aug 2011, In: MATERIALS TRANSACTIONS. 52, 8, p. 1693-1696 4 p.

  Research output: Contribution to journal › Article

  • Impeller 100%
  • Impellers 70%
  • blades 69%
  • Shear 62%
  • impellers 56%
  1 Citation (Scopus)
• 2010

  Investigation of the effect of impeller rotation rate, powder flow rate, and cohesion on powder flow behavior in a continuous blender using PEPT

  Portillo, PM., Vanarase, AU., Ingram, A., Seville, JK., Ierapetritou, MG. & Muzzio, FJ., 1 Nov 2010, In: Chemical Engineering Science. 65, 21, p. 5658-5668 11 p.

  Research output: Contribution to journal › Article

  • particle emission 100%
  • impellers 98%
  • cohesion 96%
  • positrons 70%
  • flow velocity 62%
  62 Citations (Scopus)

• Particle velocities and their residence time distribution in the riser of a CFB

  Chan, CW., Seville, JPK., Parker, D. & Baeyens, J., 1 Nov 2010, In: Powder Technology. 203, 2, p. 187-197 11 p.

  Research output: Contribution to journal › Article

  • risers 100%
  • beds 69%
  • hydrodynamics 27%
  • tracers 17%
  • gases 14%
  68 Citations (Scopus)

• PEPT combined with high speed digital imaging for particle tracking in dynamic foams

  Cole, KE., Waters, KE., Parker, D., Neethling, SJ. & Cilliers, JJ., 1 Mar 2010, In: Chemical Engineering Science. 65, 5, p. 1887-1890 4 p.

  Research output: Contribution to journal › Article

  • Positrons 100%
  • Tracers 62%
  • Foams 62%
  • Imaging techniques 49%
  • Trajectories 15%
  13 Citations (Scopus)

• PEPT study of particle motion for different riser exit geometries

  Chan, CW., Parker, D., Leadbeater, T. & Gargiuli, J., 1 Dec 2010, In: Particuology. 8, 6, p. 623-630 8 p.

  Research output: Contribution to journal › Article
  22 Citations (Scopus)

• Quantitative investigation of powder flow during die filling using positron emission particle tracking

  Wu, C., Fan, XF., Motazedian, F., Seville, JPK., Parker, D. & Cocks, ACF., 1 Jan 2010, In: Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering. 224, E3, p. 169-175 7 p.

  Research output: Contribution to journal › Article

  • Positrons 100%
  • Powders 52%
  • Cellulose 17%
  • Flow patterns 15%
  • Particle size 15%
  4 Citations (Scopus)

• Tracking inclusions in aluminium alloy castings using positron emission particle tracking (PEPT)

  Griffiths, W., Parker, D., Fan, X. & Hausard, M., 1 May 2010, In: Materials Science and Technology. 26, 5, p. 528-533 6 p.

  Research output: Contribution to journal › Article › peer-review

  • particle emission 100%
  • aluminum alloys 72%
  • positrons 70%
  • inclusions 61%
  • aluminum oxides 32%
  8 Citations (Scopus)