Andy Ingram

Accepting PhD Students

PhD projects

Andy Ingram’s work in the area of energy and chemical industries addresses polymer processing, development of applications for positron emission particle tracking (PEPT) and granular behaviour in rotating drums and fluidised beds. His work in speciality products covers granulation, granular flow, PEPT, polymer processing, powder technology and life cycle analysis. Research activity includes the development of large volume processors for polymer reaction engineering and axial and radial dispersion of particles in rotating drums.

Research activity per year

If you made any changes in Pure these will be visible here soon.

Expertise related to UN Sustainable Development Goals

In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. This person’s work contributes towards the following SDG(s):

Fingerprint

Dive into the research topics where Andy Ingram is active. These topic labels come from the works of this person. Together they form a unique fingerprint.

1 Similar Profiles

58 Article
10 Conference contribution
8 Paper
2 Chapter

Synergistic dual catalytic system and kinetics for the alcoholysis of poly(lactic acid)
Lamberti, F., Ingram, A. & Wood, J., 24 May 2021, In: Processes. 9, 6, 15 p., 921.
Research output: Contribution to journal › Article › peer-review

Open Access
File
73 Downloads (Pure)
Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent
Keith, M. J., Ingram, A. & Leeke, G. A., 1 Jan 2020, ECCM 2018 - 18th European Conference on Composite Materials. Applied Mechanics Laboratory, (ECCM 2018 - 18th European Conference on Composite Materials).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus)
Investigating grinding media dynamics inside a vertical stirred mill using the discrete element method: Effect of impeller arm length
Daraio, D., Villoria, J., Ingram, A., Alexiadis, A., Stitt, E. H. & Marigo, M., 15 Mar 2020, In: Powder Technology. 364, p. 1049-1061 13 p.
Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus)
Single-step coprecipitation and coating to prepare curcumin formulations by supercritical fluid technology
Matos, R. L., Lu, T., Leeke, G., Prosapio, V., McConville, C. & Ingram, A., 1 May 2020, In: Journal of Supercritical Fluids. 159, 104758.
Research output: Contribution to journal › Article › peer-review
7 Citations (Scopus)
Using Discrete Element method (DEM) simulations to reveal the differences in the γ-Al₂O₃ to α-Al₂O₃ mechanically induced phase transformation between a planetary ball mill and an attritor mill
Daraio, D., Villoria, J., Ingram, A., Alexiadis, A., Stitt, E. H., Munnoch, A. L. & Marigo, M., 15 Aug 2020, In: Minerals Engineering. 155, 106374.
Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus)

1 Active
9 Finished

Characterising and modelling the GEA CDC50 continuous linear powder blender using Positron Emission Particle Tracking (PEPT) and Discrete Element Method (DEM)
Ingram, A.
ASTRA ZENECA UK LIMITED
1/10/19 → 30/09/23
Project: Industry
Discrete computational modelling of twin screw granulation
Adams, M., Alexiadis, A., Ingram, A. & Zhang, Z.
ENGINEERING & PHYSICAL SCIENCE RESEARCH COUNCIL
10/08/15 → 2/02/20
Project: Research Councils
Pilot stirred mill for energy efficiency research
Rowson, N. & Ingram, A.
TECHNOLOGY STRATEGY BOARD
1/10/13 → 30/09/15
Project: Other Government Departments
PEPT Visualisation of Continuous Twin Screw Granulation
Ingram, A. & Rowson, N.
ASTRA ZENECA UK LIMITED
27/09/12 → 26/09/15
Project: Research
Mixing of visco elastic fluids using static mixers (student John Ramsay)
Simmons, M. & Ingram, A.
JOHNSON MATHEY PLC
24/09/12 → 30/04/16
Project: Industry

Modelling and Parameter Estimation of Breakthrough Curves for Amine-modified Activated Carbons under Pre-Combustion Carbon Capture Conditions
Azpiri, R. (Creator), Soares Dos Santos, D. (Creator), Ingram, A. (Creator) & Wood, J. (Creator), University of Birmingham, 2019
DOI: 10.25500/edata.bham.00000344
Dataset

1 Publication peer-review

Powder Technology, Elsevier, Lausanne (Journal)
Andy Ingram (Chair)
2014 → …
Activity: Publication peer-review and editorial work › Publication peer-review

Andy Ingram

Personal profile

Expertise related to UN Sustainable Development Goals

Fingerprint

Network

Dive into details

Synergistic dual catalytic system and kinetics for the alcoholysis of poly(lactic acid)

Catalytic degradation of a carbon fibre reinforced epoxy resin with an acetone/water solvent

Investigating grinding media dynamics inside a vertical stirred mill using the discrete element method: Effect of impeller arm length

Single-step coprecipitation and coating to prepare curcumin formulations by supercritical fluid technology

Using Discrete Element method (DEM) simulations to reveal the differences in the γ-Al₂O₃ to α-Al₂O₃ mechanically induced phase transformation between a planetary ball mill and an attritor mill

Characterising and modelling the GEA CDC50 continuous linear powder blender using Positron Emission Particle Tracking (PEPT) and Discrete Element Method (DEM)

Discrete computational modelling of twin screw granulation

Pilot stirred mill for energy efficiency research

PEPT Visualisation of Continuous Twin Screw Granulation

Mixing of visco elastic fluids using static mixers (student John Ramsay)

Modelling and Parameter Estimation of Breakthrough Curves for Amine-modified Activated Carbons under Pre-Combustion Carbon Capture Conditions

Powder Technology, Elsevier, Lausanne (Journal)

Andy Ingram

Personal profile

Expertise related to UN Sustainable Development Goals

Fingerprint

Network

Research output

Projects

Datasets

Activities