Projects per year
- 1,100 - 1,150 out of 1,470 results
Search results
-
Finished
Microstructures and Fatigue Characteristics of High-StrengthSpring Steels
Engineering & Physical Science Research Council
14/01/94 → 14/07/97
Project: Research Councils
-
Preliminary Study of the Application of Localised Laser andElectron Beam Heating to the Fabrication Procedures
Abell, S.
1/01/94 → 31/12/94
Project: Industry
-
Production of Permanent Magnets by Powder Metallurgy
Harris, I.
Engineering & Physical Science Research Council
1/01/94 → 31/12/95
Project: Research Councils
-
Analytical Modelling and Lifing in Fibre ReinforcedComposites - J G Pursell
1/01/94 → 31/12/95
Project: Industry
-
I.R.C. Nett-Shape Forging Of Titanium Alloy Aerofoil Section
Dean, T. & Loretto, M.
Engineering & Physical Science Research Council
1/01/94 → 31/01/97
Project: Research Councils
-
Iron-Aluminium Alloys for Fossil Combustion System
ABB MANAGEMENT LIMITED - ABB0001
1/01/94 → 31/12/95
Project: Research
-
Development of a non-burning titanium alloy for use to650 degrees Celsius
Blenkinsop, P. & Loretto, M.
Engineering & Physical Science Research Council
1/01/94 → 31/12/96
Project: Research Councils
-
Development of a Non-Burning Titanium Alloy for use to 650degrees Celsius
Blenkinsop, P. & Loretto, M.
1/01/94 → 31/07/97
Project: Industry
-
-
-
I.R.C. CP SERC Preparation And Characteristion Of Ultra-Fine Electroceramic Powders
Engineering & Physical Science Research Council
1/11/93 → 31/10/96
Project: Research Councils
-
Prediction of Spallation of a Alumina Layer from OverlayCoatings
Evans, H. & Ponton, C.
Engineering & Physical Science Research Council
1/11/93 → 31/10/96
Project: Research Councils
-
Crack Growth Damage Analysis and Micromodelling of FibreMatrix Reinforced Metal Matrix Composites
1/11/93 → 31/01/94
Project: Industry
-
IRC CP DRA Development, Processing And Characterisation OfOxide Matrix Fibre Composites With A Target Temp. 1400C
Ponton, C. & Marquis, P.
1/11/93 → 31/10/96
Project: Other Government Departments
-
Deformation Mechanisms and the Impact Performance ofPolymeric Foams
Mills, N.
Engineering & Physical Science Research Council
18/10/93 → 17/10/96
Project: Research Councils
-
The Production and Characterisation of HDDR Magnets-Mr Carlo Burkhardt
Harris, I.
4/10/93 → 3/10/95
Project: EU
-
Case Award - J B Langhorn Effect of Flux Pinning Additionson the Properties of HTC Thick Films
Abell, S.
1/10/93 → 30/09/96
Project: Industry
-
I.R.C. Case Award RJ Grylls: Strengthening Mechanisms InHigh Strength Cu Ni-Based Alloys.
Loretto, M.
1/10/93 → 30/09/96
Project: Industry
-
CASE: Chester- Microstructure Studies of Epitaxial CadmiumTelluride Thin Films
Aindow, M.
1/10/93 → 30/09/96
Project: Other Government Departments
-
-
Production and Characterisation of Magnetic Films (CASE -ME Tilsley)
Harris, I.
Defence and Science Technology Laboratory
1/10/93 → 30/09/96
Project: Other Government Departments
-
-
IRC PB/PB/TD Microstructure-Processing-Property RelationshipIn Gamma Titanium Alumindes
Blenkinsop, P., Bowen, P. & Dean, T.
1/10/93 → 30/09/96
Project: Other Government Departments
-
I.R.C. The Casting Properties Of Al. And Cu. Based Alloys InThe Precision Plaster Moulding Process.
Campbell, J.
1/10/93 → 30/09/96
Project: Industry
-
National Crystal Growth Facility for Superconducting Oxides
Abell, S.
Engineering & Physical Science Research Council
1/10/93 → 30/09/97
Project: Research Councils
-
IRC PB DRA Fatigue Crack Growth Resistance And FractureToughness Of Continuous Reinforced Ti MMCs.
1/10/93 → 30/09/96
Project: Other Government Departments
-
-
CASE - Structure/Property Relationships in Advance TitaniumWelded Joints (Kennedy)
1/10/93 → 30/09/96
Project: Industry
-
Microstructure Prediction and Assessment in 9 Cr Weldmetals(R Haigh)
1/10/93 → 30/09/95
Project: Industry
-
The Structural Integrity of Joints Between Aluminium AlloysD Hejcman
Knott, J.
1/10/93 → 30/09/96
Project: Industry
-
Research into High Performance Magnet for Engine StarterMotors
Harris, I.
1/10/93 → 30/09/94
Project: EU
-
Life Prediction of Fibre Reinforced Ti MMcs Under CyclicLoading in the Prescence of an Unbridged Deflect
Engineering & Physical Science Research Council
1/10/93 → 30/09/96
Project: Research Councils
-
-
Hydrogen Decrepitation of NdFeB Based Alloys for PermanentMagnets
Harris, I.
1/09/93 → 13/02/95
Project: EU
-
Processing and Magnetic & Electrical Properties ofSubstitutional and Interstital 2/17 Type Rare Earth Alloys
Harris, I.
1/08/93 → 30/06/95
Project: EU
-
I.R.C. - MTS Programme on Processability (PMP)Joint Project with Swansea
Campbell, J.
1/08/93 → 22/03/97
Project: Other Government Departments
-
Preperation, Refining and Crystal Growth of Specimens forMetal Physics Research
Abell, S.
Engineering & Physical Science Research Council
1/08/93 → 31/07/95
Project: Research Councils
-
-
Preperation and Characterisation of Isotropic andAnisotropic HDDR Powder for Hot Pressed Magnets
Harris, I.
EBG GESSELLSCHAFT FUR ELECTROMAGNISCHE
1/06/93 → 31/10/94
Project: EU
-
I.R.C. Nat.Phy.Lab. C.P. Preparation & CharacterisationOf Ultra Fine Electroceramic Powders
1/06/93 → 30/09/96
Project: Other Government Departments
-
TEM Assessment to CdHgTeExtension to EGP370
Jones, I.
Defence and Science Technology Laboratory
1/06/93 → 31/08/95
Project: Other Government Departments
-
I.R.C. The H.I.P. Casting Of Ni Alloy Investment Castings.
Campbell, J. & Harding, R.
DERITEND ADVANCED TECHNOLOGIES LIMITED
1/06/93 → 31/12/97
Project: Industry
-
Early Stages in the Electrolytic Growth of Nickel
Aindow, M.
Engineering & Physical Science Research Council
19/04/93 → 18/04/95
Project: Research Councils
-
Research of Process Optimisation of Plasma Nitrocarburising(Dr Christian Ruset)
Bell, T.
1/04/93 → 30/09/93
Project: EU
-
Research of Advanced Surface Engineering Technology (ProfTamas Reti)
Bell, T.
1/04/93 → 30/06/93
Project: EU
-
Research of Nitrided Surface Layers on Low Alloy Steels forEnhanced Corrosion Resistance (Jan Mankowski)
Bell, T.
1/04/93 → 30/09/93
Project: EU
-
-